• 官方二维码
欢迎进入红领巾瓜报官网!
当前位置:首页 - 新闻中心 - 行业资讯

行业资讯

焦化发电机组常见故障及处理方法

返回 2024.11.16 来源: 0

  发电机组转速不稳定

  The speed of the generator set is unstable

  检查焦化发电机的调速器调速主副弹簧是否变形,飞锤滚轮销孔和座架是否磨损松动,油泵齿轮和齿杆配合是否得当等。

  Check whether the main and auxiliary springs of the speed regulator of the coking generator are deformed, whether the pin hole and seat of the flying hammer roller are worn and loose, and whether the oil pump gear and gear rod are properly matched.

  找出故障原因后,磨损部件予以更换,间隙不当的机件予以调整,使调速器恢复正常。

  After identifying the cause of the malfunction, replace the worn parts and adjust the parts with improper clearances to restore the governor to normal.

  励磁电流不稳定

  Unstable excitation current

  停机检查发电机励磁回路调节电位器和旋转整流器接线是否良好,并进行必要的检修。

  Stop the machine and check if the potentiometer and rotating rectifier wiring of the generator excitation circuit are in good condition, and perform necessary maintenance.

  输出电压异常

  Abnormal output voltage

  用500惫兆欧表查找交流同步发电机或交流励磁机励磁绕组对地绝缘是否受损,并修复。

  Use a 500V megohmmeter to check if the insulation of the excitation winding of the AC synchronous generator or AC exciter to ground is damaged and repair it.

base64_image

  检查励磁回路础痴搁电路,查明电路故障点,更换损坏的元器件。

  Check the excitation circuit AVR circuit, identify the fault point of the circuit, and replace damaged components.

  发电机组频率不稳

  The frequency of the generator set is unstable

  检查发电机组问题和调速控制系统问题,例如喷油器雾化效果、喷油泵工作情况等。

  Check for issues with the generator set and speed control system, such as the atomization effect of the fuel injector and the operation of the fuel injection pump.

  清洗油污、油泥,紧固各部螺丝,检查涡轮增压器、笔罢泵、喷油器等部件的磨损程度,并进行必要的调校或更换。

  Clean oil stains and sludge, tighten all screws, check the wear of components such as turbocharger, PT pump, and fuel injector, and make necessary adjustments or replacements.

  发电机组电池问题

  Battery issues with the generator set

  定期检查发电机组电池电量和启动电路,确保正常启动。

  Regularly check the battery level and starting circuit of the generator set to ensure normal startup.

  电池老化或损坏时,及时更换。

  When the battery ages or is damaged, replace it promptly.

  对焦化发电机组进行定期维护和检修,可以及时发现并处理潜在故障,确保发电机组的稳定运行。

  Regular maintenance and overhaul of coking power generation units can timely detect and handle potential faults, ensuring the stable operation of the power generation units.

  本文由焦化发电机组提供帮助,更多的相关内容请点击:希望本文能够为您带来帮助,感谢您的阅读!

  This article is assisted by coking power generation units. For more related content, please click: I hope this article can be helpful to you. Thank you for reading!

新闻搜索
红领巾瓜报
  • 服务热线

    0531-62325028
    0531-69951266

焦化发电机组常见故障及处理方法

  发电机组转速不稳定

  The speed of the generator set is unstable

  检查焦化发电机的调速器调速主副弹簧是否变形,飞锤滚轮销孔和座架是否磨损松动,油泵齿轮和齿杆配合是否得当等。

  Check whether the main and auxiliary springs of the speed regulator of the coking generator are deformed, whether the pin hole and seat of the flying hammer roller are worn and loose, and whether the oil pump gear and gear rod are properly matched.

  找出故障原因后,磨损部件予以更换,间隙不当的机件予以调整,使调速器恢复正常。

  After identifying the cause of the malfunction, replace the worn parts and adjust the parts with improper clearances to restore the governor to normal.

  励磁电流不稳定

  Unstable excitation current

  停机检查发电机励磁回路调节电位器和旋转整流器接线是否良好,并进行必要的检修。

  Stop the machine and check if the potentiometer and rotating rectifier wiring of the generator excitation circuit are in good condition, and perform necessary maintenance.

  输出电压异常

  Abnormal output voltage

  用500惫兆欧表查找交流同步发电机或交流励磁机励磁绕组对地绝缘是否受损,并修复。

  Use a 500V megohmmeter to check if the insulation of the excitation winding of the AC synchronous generator or AC exciter to ground is damaged and repair it.

base64_image

  检查励磁回路础痴搁电路,查明电路故障点,更换损坏的元器件。

  Check the excitation circuit AVR circuit, identify the fault point of the circuit, and replace damaged components.

  发电机组频率不稳

  The frequency of the generator set is unstable

  检查发电机组问题和调速控制系统问题,例如喷油器雾化效果、喷油泵工作情况等。

  Check for issues with the generator set and speed control system, such as the atomization effect of the fuel injector and the operation of the fuel injection pump.

  清洗油污、油泥,紧固各部螺丝,检查涡轮增压器、笔罢泵、喷油器等部件的磨损程度,并进行必要的调校或更换。

  Clean oil stains and sludge, tighten all screws, check the wear of components such as turbocharger, PT pump, and fuel injector, and make necessary adjustments or replacements.

  发电机组电池问题

  Battery issues with the generator set

  定期检查发电机组电池电量和启动电路,确保正常启动。

  Regularly check the battery level and starting circuit of the generator set to ensure normal startup.

  电池老化或损坏时,及时更换。

  When the battery ages or is damaged, replace it promptly.

  对焦化发电机组进行定期维护和检修,可以及时发现并处理潜在故障,确保发电机组的稳定运行。

  Regular maintenance and overhaul of coking power generation units can timely detect and handle potential faults, ensuring the stable operation of the power generation units.

  本文由焦化发电机组提供帮助,更多的相关内容请点击:希望本文能够为您带来帮助,感谢您的阅读!

  This article is assisted by coking power generation units. For more related content, please click: I hope this article can be helpful to you. Thank you for reading!

下一篇: